Is There A Glue To Repair A Broken J D Plastic Hood

slowkansasboy

Posted 7/25/2018 17:25 (#6892357) Discipline: Agglutinative to fix cracked plastic hood

I have a John Deere 7130 tractor,and the hood has croaky back where it mounts near the hinges at the rear. JB weld didn't work what blazon of glue would work best? And I am not buying a new hood yet.
Tia
Jason_WI

Posted 7/25/2018 17:49 (#6892390 - in reply to #6892357) Bailiwick: RE: Adhesive to prepare croaky plastic hood

NE WI

Probably need to have it plastic welded. Well-nigh adhesives don't stick well to plastic.

https://world wide web.harborfreight.com/plastic-welding-kit-with-air-motor-and...

deereboy8400

Posted vii/25/2018 17:59 (#6892399 - in reply to #6892357) Subject area: RE: Adhesive to ready cracked plastic hood

East Central Indiana

After welding or gluing, build it upward with fiberglass. Birddy

Posted 7/25/2018 18:00 (#6892401 - in reply to #6892399) Subject: RE: Adhesive to fix cracked plastic hood

ND

deereboy8400 - 7/25/2018 17:59 Afterwards welding or gluing, build it up with fiberglass.

Not certain about that, it volition not stick.

bollpuller

Posted 7/25/2018 19:16 (#6892533 - in answer to #6892357) Subject area: RE: Adhesive to fix cracked plastic hood

Grandfield, Ok.

On the plastic truck hoods I accept found smc resin will bond to the plastic. My thoughts are to use the smc resin with the recommended harder and fiber glass mat will unremarkably hold. Bounce moma Deere for the right stuff. Freightliner has some body hood gum which might work. When you observe the right strong report back as lots of cleaved dark-green hoods around.

Edited by bollpuller 7/25/2018 nineteen:17

reedfarmer

Posted vii/25/2018 21:53 (#6892935 - in reply to #6892357) Field of study: RE: Agglutinative to fix croaky plastic hood

Eastern Arkansas

Grind out the scissure, then rivet a slice of steel behind the crack that is around two inches bigger than the crack on all sides. And so fill with a body filler with fiberglass resin in it. That is what I have washed on my 8420hoods and it seems to work well. gearhead9056

Posted vii/25/2018 22:38 (#6893039 - in answer to #6892357) Subject: RE: Adhesive to fix croaky plastic hood

SESD

Car body supply store will have an epoxy for repairing plastic bumpers, it etches itself into the plastic so it stick permenant and flexes with the plastic.

http://www.toolpan.com/3M-Automotive-4240--3M-Duramix-Plastic-Repai...

berggrenfarms

Posted 7/26/2018 08:25 (#6893516 - in reply to #6892357) Subject: RE: Adhesive to set up cracked plastic hood

Nebraska, The land of corn and cattle

I recently bought a hot stapler and plastic welder to fix this kind of stuff, I highly reccomend both, the stapler makes a mechanical connection and the plastic welder only doubles it.

Is There A Glue To Repair A Broken J D Plastic Hood,

Source: https://talk.newagtalk.com/forums/thread-view.asp?tid=795958&DisplayType=flat&setCookie=1

Posted by: lewisyedis1951.blogspot.com

Share this post